A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
‹› Do not prime the adhesive surfaces and do not treat them with cleaning solution.
‹› Applying primer is only necessary if a new locking flange cover will be used.
-
Cut the sealant cartridge nozzle as shown in the illustration.
‹› Dimension - a - = 7 mm.
-
Apply a new sealant bead to the smoothed sealant on the locking flange cover and insert the cover.
‹› The arrow on the cover must point in the direction of travel.
-
Install loading aid frame.
-
Connect battery..
-
After installing the fuel level sensor 2, fill the vehicle with at least 5 liters of fuel.