A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Accelerator Pedal Position Sensor: Service and Repair
Accelerator Pedal Module with Accelerator Pedal Position Sensor
Removing
-
Remove driver side lower instrument panel cover.
-
Disconnect electrical connector - 2 - by pressing the release - 1 - up - arrow -.
-
Remove bolt - 3 - and remove accelerator pedal module downward.
Installing
‹› Tightening specifications. Refer to => [ Accelerator Pedal Module Assembly Overview ] See: Computers and Control Systems/Electronic Throttle
Actuator/Service and Repair/Removal and Replacement/Accelerator Pedal Module Assembly Overview.
Installation is in reverse order of removal, noting the following:
-
Engage accelerator pedal module - 4 - on the bottom of the pedal bracket - 1 -, insert the centering pin - 2 - and tighten bolt - 3 -.