A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Fuel Pressure Release: Service and Repair
Before Opening High Pressure Fuel Injection System
CAUTION!
The fuel injection system is divided into a high pressure section (maximum approximately 120 bar) and a low pressure system
(approximately 6 bar).
Before opening high pressure parts, e.g. removing high pressure pump, fuel rail, fuel injectors, fuel pipes, etc., reduce the fuel pressure in
the high pressure area to a residual pressure of approximately 6 bar.
-
Connect the VAS 5051B.
-
Start engine and run at idle speed.
-
Select "engine electronics" in OBD.
-
Then select "Measured values".
-
Select "Fuel pressure" from the list.
-
When the engine is at idle, fuel pressure between 30 and 40 bar is displayed.
-
Pry off cover - 1 - on the left of the instrument panel with the trim removal wedge (3409) - arrow -.