Audi Workshop Service and Repair Manuals

-

Disconnect the electrical connector - 3 -.

Installing

‹› Tightening specification => [ Bi-Xenon Headlamps with Cornering Lamp Assembly Overview ] See: Lighting and Horns/Headlamp/Service and

Repair/Bi-Xenon Headlamps with Cornering Lamp Assembly Overview.

Install in reverse order of removal, observing the following:

-

Check seal between power output stage and headlamp housing.

-

Install headlamp housing => [ Headlamp Housing ]. See: Lighting and Horns/Headlamp/Service and Repair/Bi-Xenon Headlamps with Cornering
Lamp/Headlamp Housing

-

Adjust headlamps after installing => [ Headlamps Checking and Adjusting Conditions ] See: Lighting and
Horns/Headlamp/Adjustments/Headlamps Checking and Adjusting Conditions.