A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Seat Position Sensor: Service and Repair
Seat Position Sensor
Seat Position Sensor
=> [ Seat Position Sensor with Seat Occupied Sensor for Belt Fastening Detection ]
=> [ Seat Position Sensor with Seat Occupied Sensor for Passenger Airbag
Deactivation ]
Seat Position Sensor with Seat Occupied Sensor for Belt Fastening Detection
The seat position sensor is provided as a replacement part with the wiring harness and the black 10-pin connector. The following wires with
connectors are contained in the wiring harness.
‹› Wire with seat belt latch coupling connector (driver seat).
‹› Wire with seat belt latch coupling connector (passenger seat).
‹› Wire with front passenger seat occupied sensor ( G128) coupling connector.
Removing
CAUTION!
‹› Follow the safety precautions for pyrotechnic components. Refer to => [ Restraint System Components Safety Precautions ] See:
Service Precautions.
‹› Before handling pyrotechnic components (for example, disconnecting the electrical connector), the person handling it must "discharge
static electricity". This can be done by touching door striker, for example.
-
Remove front seat:
‹› Standard and Sport Manual Seat. Refer to => [ Manual Standard Front Seats ] See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Manual Standard Front Seats.
‹› Standard and Sport Power Seat, Comfort Seat and Super Sport Seat. Refer to => [ Power Standard Front Seats ] See: Body and
Frame/Seats/Service and Repair/Overhaul/Power Standard Front Seat with or without Memory Function.
-
Attach front seat to Fixture For Seat Repair ( VAS 6136). Refer to => [ Front Seat, Installing on VAS 6136 ] See: Body and Frame/Seats/Service
and Repair/Removal and Replacement/Seat Versions Overview.
-
Remove the bolt - 3 -.