A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Turn the hub by hand until oil runs out of the pressure side.
-
Insert the power steering pump in the bracket.
‹› The sleeve - 2 - is driven back slightly.
-
First install the front bolts - 1 - (quantity: 3) loosely.
-
Then install the rear bolt - 3 - loosely.
-
First tighten the bolts - 1 - and then the bolt - 2 -.
-
Insert the pressure line - 2 - into the power steering pump as far as the stop and tighten the bolts - 1 -.