A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
The suspension components could be damaged.
If the subframe, the steering gear or the subframe crossbrace are not installed correctly, do not rest the vehicle on its wheels.
The vehicle must not be supported on the subframe or the subframe crossbrace (e.g. using a floor jack).
If the vehicle must be moved, the crossbrace must be installed with the old bolts and square nuts and tightened to the specification without
any additional turning.
Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
‹› The square nuts must be inserted into the cast recesses before installing the subframe shields, where applicable. Refer to => [ (Item 16) Square Nut
] See: Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace, Stabilizer Bar, Coupling Rod and Subframe Shield Assembly
Overview.
Tightening specifications: Refer to => [ Subframe, Crossbrace, Stabilizer Bar, Coupling Rod and Subframe Shield Assembly Overview ] See:
Stabilizer Bar/Service and Repair/Front Suspension/Subframe, Crossbrace, Stabilizer Bar, Coupling Rod and Subframe Shield Assembly Overview.