A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Install the spindle (3346/2) and (3301) and support arm bearing installation tool (3346/3) approximately 1.5 cm into the body on the opposite side
of the bonded rubber bushing to be replaced as illustrated.
1. (3301)
2. (3346/3)
3. (3346/2)
‹› Turn (3346/3) on the (3346/2) until dimension - a - 4 cm is reached.
-
Lower the subframe 4 cm only.
Applies to a hydraulic bonded rubber bushing