A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
‹› Always replace after removal.
8
Washer
9
Wheel Bearing Housing
10
Nut, 40 Nm
‹› Always replace after removal.
11
Upper Front Control Arm
‹› Removing and installing, refer to => [ Upper Control Arm ] See: Control Arm/Service and Repair/Front Suspension/Upper Control Arm.
12
Bolt, 50 Nm +90°
‹› Always replace after removal.
‹› Must be tightened in the curb weight position. Refer to => [ Wheel Bearing, with Coil Spring, Lifting to Curb Weight Position ] See: Wheel
Bearing/Service and Repair/Procedures/Front Suspension.
13
Nut
‹› Always replace after removal.
14
Nut, 90 Nm +90°
‹› Always replace after removal.
‹› Must be tightened in the curb weight position. Refer to => [ Wheel Bearing, with Coil Spring, Lifting to Curb Weight Position ] See: Wheel
Bearing/Service and Repair/Procedures/Front Suspension.
15
Bolt
‹› Always replace after removal.
16
Control Arm
17
Bolt, 40 Nm +90°
‹› Always replace after removal.
‹› Must be tightened in the curb weight position. Refer to => [ Wheel Bearing, with Coil Spring, Lifting to Curb Weight Position ] See: Wheel
Bearing/Service and Repair/Procedures/Front Suspension.
18
Coupling Rod
‹› Note installed position. Refer to => [ Coupling Rod ] See: Stabilizer Bar/Service and Repair/Front Suspension/Coupling Rod.
19
Shock Absorber Fork
‹› Shock absorber fork, removing and installing, refer to => [ Shock Absorber Fork ] See: Suspension Strut / Shock Absorber/Service and
Repair/Removal and Replacement/Front Suspension/Shock Absorber Fork.
20
Nut, 40 Nm +180°
‹› Always replace after removal.
21
Bolt
‹› Always replace after removal.
22
Suspension Strut
‹› Suspension strut with mounting bracket, removing and installing, refer to => [ Suspension Strut with Mounting Bracket ] See: Suspension Strut