A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Drive axle AAR 3300 i (T40018) is shown in illustration.
-
Press remaining quantity of grease in protective boot.
-
Make sure that correct seating of boot on joint.
-
The boot must fit in the groove and on the joint contour.
-
Position joint in center position. See the min - max position.
‹› Vent CV boot - arrow -, for example using a screwdriver, while positioning joint piece in center position.
-
Install clamp.
‹› For a better alignment of multi-point socket head screws when installing drive axle, clamping sleeve connecting tube - 2 - must be between joint
connecting flanges - 1 -.