A4 Quattro Wagon V6-2.8L (AHA) (1998)
Transmission Position Switch/Sensor: Service and Repair
MULTI-FUNCTION TRANSMISSION RANGE (TR) SWITCH, REPLACING
Removal
-
Remove left transmission support.
-
Remove Multi-Function TR Switch at transmission and pull off at selector shaft.
Installation
-
Install Multi-Function TR Switch onto selector shaft.
-
Flat on splines in switch -3- must be positioned on flat of selector shaft -1 -.
NOTE:
-
Center Multi-Function TR Switch on the selector shaft.
-
Do not twist and do not use any force to install the switch.
-
Damage to the contacts may result if the switch is mishandled.
-
Turn switch until installation hole -4- on switch housing can be inserted onto dowel pin -2- of transmission housing.