A4 Quattro Wagon V6-2.8L (AHA) (1998)
![background image](/audi/a4_quattro_wagon/v6-2.8l_(aha)/Page-3723004.png)
-
Slide accelerator pedal cable -3- (with kick-down switch bracket) and cable positioner -1- through the back and front plenum walls as shown in
illustration.
-
-arrow- shows installed position
-
Secure kick-down switch bracket with retaining clip -2-.
-
On engine compartment side of plenum
-
Connect kick-down-switch harness connector -arrow-.
All vehicles
-
Slide cable end through back wall of plenum -arrow 1-, secure by twisting cable positioner tab 90° in clockwise direction -arrow 2- until triangular
shaped piece on cable passes through the same shaped opening in the back wall of the plenum.
-
Ensure that when cable comes to rest position, the positioner tab has returned to a vertical position; thus capturing and correctly positioning the