A4 Quattro Wagon V6-2.8L (AHA) (1998)
-
Check for leaks and noises.
Installation position:
-
Angle between suspension strut mounting bracket axis -A- and shock absorber axis -B- = 0°.
-
Angle between axis -B and axis -C- = 21° ± 2°
Pay attention to this when assembling
Disassembling and assembling suspension strut
Disassembling
-
Remove suspension strut.
-
Install suspension strut into VAG1752 spring tensioner.
Note: Illustration shows left-hand suspension strut.
-
Insert VAG1752/1 spring compressor.