A4 Quattro Wagon V6-2.8L (AHA) (1998)
Valve Body: Service and Repair
Overview of Removed Parts With Park/Neutral Position (PNP) Switch -E17-
Overview of Removed Parts With Park/Neutral Position (PNP) Switch -E17-
1. Drain plug - 40 Nm (30 ft lb)
5 mm hex socket
Remove to drain ATF
2. Seal
Always replace
3. Bolt - 10 Nm (7 ft lb)
Tighten bolts for oil pan diagonally in several stages
4. Oil sump
Removing and installing, refer to Oil Pan, Removing and Installing See: Oil Pan, Removing and Installing
5. Gasket
Always replace
6. ATF strainer
Removing and installing, refer to Oil Strainer, Removing and Installing See: Oil Strainer, Removing and Installing
7. Bolt - 8 Nm (70 inch lb)
For mounting valve body: 1 bolt M6 x 30, 16 bolts M6 x 60
Note tightening method, refer to Valve Body, Removing and Installing See: Valve Body, Removing and Installing
8. Valve body
Removing and installation See: Valve Body, Removing and Installing
Allocation according to transmission code letters, refer to the parts catalog
9. Bolt - 8 Nm (70 inch lb)
10. Bracket
For wiring harness
Hook in wiring harness
Mounted with valve body bolts