A4 Quattro Wagon V6-2.8L (AHA) (1998)
Valve Body: Service and Repair
Oil Pan, Removing and Installing
Oil pan, removing and installing
Special tools and equipment
-
VAG1306 drip tray
Removing
-
Remove noise insulation panel (arrows).
-
Place VAG1306 drip tray under transmission.
-
Remove ATF drain plug -1- and drain ATF.
-
Loosen bolts of oil pan in diagonal sequence.
Installing
Installation is reverse of removal, noting the following:
-
Clean all 4 magnets in oil pan recesses. Ensure full surface contact of the magnets on the oil pan.
-
Replace gaskets.