A4 Quattro Wagon V6-2.8L (AHA) (1998)
Valve Body: Diagrams
1- Drain plug - 40 Nm (30 ft lb)
-
5 mm hex socket
2- Seal
-
Always replace
3- Bolt - 10 Nm (7 ft lb)
-
Tighten bolts for oil pan diagonally in several stages
5- Gasket
-
Always replace
7- Bolt - 8 Nm (70 inch lb)
-
For attaching valve body: 1 bolt M6 x 30, 16 bolts M6 x 60
8- Valve body
9- Bolt - 8 Nm (70 inch lb)
-
Item 7
10- Bracket for wiring harness
-
Insert wiring harness
-
Attached with bolts for valve body
11- Bolt - 6 Nm (53 inch lb)
-
Always replace
12- Transmission Vehicle Speed Sensor -G38-
13- Inner oil line
-
Always replace after removing
14- O-ring
-
Always replace
-
Coat with petroleum jelly
15- Spacer sleeve
-
Height: 8 mm
16- Speedometer Vehicle Speed Sensor-G22-
17- O-ring
-
Always replace
-
Coat with special grease
18- Multi-Function Transmission Range Switch -F125-
19- Bolt - 8 Nm (70 inch lb)
20- O-ring
-
Always replace
-
Coat with petroleum jelly
21- Locking clasp