A4 Quattro Wagon V6-2.8L (AHA) (1998)
35. Solenoid Valve 5
-
With O-ring
-
Apply a thin coat of petroleum jelly to O-ring before installing
-
To replace, refer to "Oil Pan Removing and Installing", below
36. Solenoid Valve 1
-
Without O-ring
-
To replace, refer to "Oil Pan Removing and Installing", below and unbolt guide plate for park lock mechanism
-
When installing, do not tighten bolts for guide plate (23 Nm) when selector lever is in position "P"
37. Oil Strainer Retaining Bolt
-
Tighten to: 6 Nm (53 inch lbs)
38. Magnet
-
4 magnets in the beads of oil pan
-
Clean
-
Ensure that magnet is making contact with the oil pan over its full surface
39. O-ring
-
Always replace
40. ATF filler plug
-
Tighten to: 80 Nm (59 ft lb)
-
17 mm hex socket
Shift Solenoid Removal/Installation
-
Remove oil pan
-
Refer to numbers 28 through 36 above for instructions.