A4 Quattro Wagon V6-3.0L (AVK) (2002)
Front Door Panel: Component Locations
Front Door Trim Components, Assembly Overview
Front Door Trim Components, Assembly Overview
1
-
Speed nut (4x)
2
-
Bolt (4x)
3
-
Screws (2x)
4
-
Decorative panel
5
-
Armrest, lower part
6
-
Bolt
7
-
Expanding nut (4x)
8
-
Door trim.
-
Removal
-
Remove lower part of armrest -5-.
-
Remove screws -3- (2x) from door trim -8-.
-
Remove bolts -6- from door trim -8-.Fig 3
-
Unclip decorative panel -4-.
-
Remove decorative panel -4- toward front.
-
Remove bolt -2- (4x) from door trim -8-.
-
Unclip door trim -8- -> Fig. 3.
-
Raise door trim -8- upward approx. 20 cm. out from door shell.
-
Disengage Bowden cable for interior door mechanism => Fig. 1
-
Disconnect electrical harness connectors => Fig.2
-
Installing
-
When installing, speed nuts -1- (4x) for expanding nuts -7- (4x) must be clipped in.
-
When installing, door trim must be pressed in the middle to door shell.
Fig. 1 Disengaging Bowden cable