A4 Quattro Wagon V6-3.0L (AVK) (2002)
12. Retention spring
^
Insert in both holes in brake caliper housing
Note: After inserting the retaining spring into the two holes, press it under the brake carrier. If incorrectly installed, it is not possible to adjust the
wear of the outer pad, and the pedal travel will be increased as a result.
13. Brake disc
^
Always replace on both sides of the car
^
Remove brake caliper prior to removing
^
Always dress evenly, on both sides, starting from thickness when new
^
Thickness, Refer to Brakes and Traction Control, Specifications, Mechanical
14. Brake caliper housing
^
Unscrew from brake carrier to replace brake pads
^
Servicing brake calipers, Refer to Brake Caliper, Service and Repair
15. Guide pin, 25 Nm
16. Trim cap
^
Take off