A4 Quattro Wagon V6-3.0L (AVK) (2002)
/Page-577007.png)
All:
^
Install Camshaft Position (CMP) Sensor housing and tighten bolts -1to -6-.
^
Check whether piston rings at camshafts are installed and whether piston ring ends are engaged with each other.
^
If necessary, engage ends of installed piston rings (arrows), as depicted in illustration.
Note: If the camshaft sealing rings are being replaced, they must be removed from Camshaft adjustment housing before installation, using T40017
lever. Installing camshaft sealing rings.
