A4 Quattro Wagon V6-3.0L (AVK) (2002)
Fig. 3 Allocation of crankshaft bearing shells for cylinder block
Bearing shells with the correct thickness are allocated to the cylinder block in the factory. Colored dots on the bearing shells serve for identifying
bearing shell thickness.
Note: The arrow points to the belt pulley side.
Allocation of bearing shells to cylinder block is marked by a letter beside the respective bearing.
Fig. 4 Allocation of crankshaft bearing shells for bearing caps
Bearing shells with the correct thickness are allocated to the bearing caps in the factory. Colored dots on the bearing shells serve for identifying
bearing shell thickness.