A4 Quattro Wagon V6-3.0L (AVK) (2002)
-
Remove bolts -arrows-.
-
Disengage evaporative emission (EVAP) canister purge regulator valve -N80- -1- on air duct.
-
Remove air duct -2-.
Continuation for both sides:
-
Detach cover for main beam from headlight housing.
-
Unplug connector -3- at main beam bulb.
-
Disengage wire clip -2- and take bulb -1- out of housing.
Installing
Install in reverse order, paying attention to the following:
-
Insert new bulb in housing, taking care not to touch glass bulb with bare hands.
-
Secure bulb with spring clip.
-
Re-attach connector and close housing cover.
-
Secure housing cover with spring clip.