A4 Quattro Wagon V6-3.0L (AVK) (2002)
5
-
Fuel filter
-
Location: Arrow points in direction of flow.
6
-
Supply line
-
To fuel supply on fuel distributor
7
-
Sealing ring
-
Replace
8
-
Banjo bolt M12
-
20 Nm
9
-
Protector plate
-
For fuel filler neck
-
With Ground connection
-
Before installing a mounting screw (item 10) ensure that screw eye of Ground connection fits tightly
10
-
25 Nm
11
-
Ground - connection
-
Ensure tight fit of metal ring on fuel filler neck
-
Check chamfer on protective plate (Item 9).
-
After installation, check continuity between metal ring on fuel filler neck and chassis Ground: must be approx. 0 Ohms
12
-
Cover
13
-
Gasket
-
Replace if damaged.
14
-
Locking ring
15
-
Rubber cap
16
-
Overflow hose
17
-
Bleed line
-
Between EVAP canister and EVAP canister purge regulator valve N80
18
-
Bleed line
-
Between the bleed valve on fuel filler neck and EVAP canister
19
-
Fuel tank
20
-
Heat shield
-
For fuel tank
-
Fastened on rear edge of fuel tank with adhesive tape
21
-
Plastic nut
-
2 Nm
22
-
Carrier plate
23
-
Heat shield
-
For fuel filler neck
24
-
Mounting clamp
-
Ensure tight fit
25
-
Plastic nut
-
2 Nm
26
-
25 Nm
Fig. 1 Ground connection, installed position
-
Route the Ground connection -Arrow-, as shown in illustration.
-
Ensure Ground connector fits tightly on filler neck Ground clamp.
Fig. 2 Ground connection, installed position, cont.