A4 Quattro Wagon V6-3.0L (AVK) (2002)
^
"Update - Programming" (arrow) will not appear.
Note:
The "Update - Programming" function is only available when the inserted flash CD level and current vehicle ECM level are different
If "Update - Programming" does not appear:
^
Programming (flashing) ECM cannot be performed, continue to diagnose condition.
If software level DOES NOT match the level indicated on Flashing CD:
^
"Update - Programming" (arrow) will appear.
PRIOR to performing procedure to
"Update - Programming" (flash) the ECM:
Note:
Failure to erase ALL fault memories may cause "Update - Programming" (flashing) procedure to fail!
^
ALL fault memories must be interrogated and erased.
-
Select Diagnosis function 06 "End output".
-
Select Diagnosis function 00 "Collection services".
-
Select "Check DTC memory - complete system" which will interrogate all fault memories.
-
Print all DTCs.
-
Erase ALL fault memories.
Once ALL fault memories have been erased: