A4 Quattro Wagon V6-3.0L (AVK) (2002)
Impact Sensor: Locations
Crash Sensor For Rear Side-Airbag, Assembly Overview
Crash Sensor For Rear Side-airbag (Side Curtain Airbag), Assembly Overview
WARNING: Observe safety precautions for working on airbags.
1
-
Crash sensor for side airbag rear, driver's side -G256- and passenger side -G257-
-
Removal
NOTE: In the illustration, crash sensor for rear side-airbag is depicted on the passenger side. Removal and installation on the driver side proceeds in
the same manner.
See Cautions before beginning repairs on electrical system
-
Disconnect battery Ground (GND) strap.
-
Remove side panel.
-
Disengage tab on yellow connector -3-and disconnect connector.
-
Remove two bolts -2- at crash sensor.
-
Installing
-
Switch ignition on.
WARNING: No person may be inside the vehicle when connecting the battery.
See Cautions for connecting Telematics battery
-
Connect battery Ground (GND) strap.
2
-
Bolts (2x)
-
Tightening torque 9 Nm.
3
-
Acceleration sensor connector