A4 Quattro Wagon V6-3.0L (AVK) (2002)
-
Place sticker for deactivated side airbag -1- on left and right at door frame -2- of rear doors (arrow).
-
Fax copies of Repair Order and completed and signed Client request form to Audi Product Support at : (800) 839-5499. Also retain a copy for
your own records.
WARNING:
-
After deactivation, appropriate adhesive language labels from label kit MUST be affixed to the appropriate location on the vehicle.
-
Ensure that the Airbag Control Module -J234- has been correctly coded for side airbag deactivated.
Activating
WARNING: Observe safety precautions for working on airbags.
-
Remove rear seat
NOTE: Side airbags at left and right can only be switched on together. It is not possible to switch on the side airbags individually.
-
There is one harness connector at left and right by the "C-pillar"
-
Cut cable ties for harness connectors.
-
Connect harness connectors -1- for side airbags.
-
Connect harness connectors -1- in cushion cut-out of rear seat bench.
-
Remove rear wheelhousing trim.
-
Connect harness connector to crash sensor at C-pillar.
-
Install rear wheelhousing trim.
-
Install rear seat bench.
-
Remove sticker for deactivated side airbags from door frame of rear door.
-
Remove any residual adhesive from door frame using cleaning solvent.
-
Change coding of Airbag Control Module -J234- to the code for rear side airbags.