A4 Quattro Wagon V6-3.0L (AVK) (2002)
Transmission Position Switch/Sensor: Service and Repair
Multi-Function Transmission Range (TR) Switch -F125-, Removing and Installing
Multi-Function Transmission Range (TR) Switch -F125-, removing and installing
Removing
-
Removing left transmission support.
-
Unbolt Multi-Function Transmission Range (TR) Switch -F125- from transmission and pull off from shift rod.
Installing
-
Connect Multi-Function Transmission Range (TR) Switch -F125- to shift rod. Flap part at splines in switch -3- must align with flat part of shift rod
-1
Note: Set Multi-Function Transmission Range (TR) Switch -F125- onto shift rod in centered manner Do not cant and do not set with force. Risk
of damage at switch terminals.
-
Rotate switch until the alignment bore -4- at switch housing can be fitted on the alignment pin -2- at transmission housing.
-
Installing left transmission support .
Tightening torques