A4 Quattro Wagon V6-3.0L (AVK) (2002)
6 - Bolt (5 Nm)
^
Insert line until impact by hand before tightening
7 - O-ring
^
Apply ATF when inserting
^
Always replace
8 - Bolt (5 Nm)
^
Insert line until impact by hand before tightening
9 - Union nut - 29 Nm
10 - Bracket
11 - Hex bolt does not need to be removed when removing and installing ATF lines.
12 - Nut - 5 Nm
13 - Clamp
14 - Bracket
^
on engine/transmission support
ATF lines, removing and installing, (vehicles with 6 cyl. engine)