A4 Quattro Wagon V6-3.0L (AVK) (2002)
/Page-1394004.png)
-
Insert locking cable -1- into ignition/starter switch.
-
Check that interlock lever -2- is locked.
-
Bring ignition/starter switch into locking position (ignition off).
-
Check whether selector lever is still in position "P".
-
Engage locking cable eye in pin -3-.
-
Slightly lift securing spring -4-.
-
Push locking cable support bracket -5- into shift mechanism from the right until securing spring 4-engages.
-
Adjusting locking cable.
