A4 Quattro Wagon V6-3.0L (AVK) (2002)
-
Push lever/selector shaft -2- on transmission fully forward into position "S" (on illustration fully left) -arrow-.
-
Shift selector lever into "S" and carefully press up ball head of selector lever cable -1- on lever/shift rod -2- using a pair of pliers.
Note: Do not deform lever/shift rod when pressing up or else shifting cannot be precisely adjusted any more.
-
Bolt on mounting bracket for selector lever cable in this position (arrow).
-
Install shielding plate/selector lever cable, if present.
-
Install left transmission support with transmission mount
-
Fit driveshaft to transmission.
-
Bolt heat shield for driveshaft onto transfer box (arrows). - Install front exhaust system with catalytic converter.
-
Adjust selector lever cable.
Tightening torques