A4 Quattro Wagon V6-3.0L (AVK) (2002)
Clutch Master Cylinder: Service and Repair
[01E] 6 Spd. M/T AWD
Master cylinder, removing and installing
Special tools, testers and auxiliary items
^
Hose clamp 3094
Removing
-
If installed, remove cover above plenum chamber.
-
Disconnect battery Ground (GND) strap with the ignition switched off.
-
Remove E-Box from plenum chamber as follows:
-
Pull off clip -1- and lift wind grill -A- slightly. Now remove screw (arrow -2-).
-
Remove remaining screws (arrows) and remove cover.
-
Remove engine control unit and 8-point relay carrier (if fitted)
-
Unplug connector in connector station.
-
Pull engine wiring harness together with rubber grommet out through opening in electronics box.