A4 Quattro Wagon V6-3.0L (AVK) (2002)
Shifter M/T: Service and Repair
Shift Lever With Rear Push Rod, Removing and Installing
Shift lever with rear push rod, removing and installing
Removing
Note: The shift lever knob is removed together with shift lever cover and cover for center console.
-
Lift cover for center console upward -arrows-.
-
Release connector piece -1- in direction of arrow and pull off shift lever knob together with shift lever cover upward.
-
Lift cover off -1- first in direction of arrow -A- and then pull out in direction of arrow -B-.
-
Remove bolts -arrows C- and then pull ashtray -2- from center console