A4 Quattro Wagon V6-3.2L (BKH) (2005)
Windshield: Removal and Replacement
Assembly Overview
Assembly Overview
1
-
Windshield
-
Distance to roof dimension - a - = 6 mm ± 0.5 mm
-
Align distance - d - at sides.
NOTE: Stickers on windshield (e.g. for airbag) must be replaced in same position on new windshield.
2
-
Adhesive bead
-
Observe curing times
-
Note varying spacing dimensions to window edge.
-
Distances of top and side window edge dimension - b - and dimension - d - = 4 mm
-
Distance at lower window edge measured from inner side of clip dimension - c - = 10 mm.
-
Bead cross section
-
Bead width = 8 ± 2 mm
-
Bead height = 13.5 ± 1.5 mm
3
-
Spacers
-
5x
-
Affix in regular intervals to retaining strip
4
-
Protective piping
-
Only installed as new part.
-
Only remove after installing windshield and before installing plenum chamber cover
5
-
Plenum chamber cover
-
Pull protective piping - 4 - from retaining strip before installing plenum chamber cover.
-
Press into fastening strip only after window adhesive curing time has elapsed.