A4 Sedan V6-2.8L (AFC) (1996)
/Page-4593003.png)
Rear upper tethers, retrofitting
-
Beginning in trunk, use felt tip marker to mark center point of center holes (3x).
-
Remove rear shelf.
CAUTION: The thread washer must always be installed from below (trunk side).
-
Install threaded washer - 7 - starting from trunk.
-
Cut 23 mm hole at each marked point (3x).
-
Install rear shelf.
-
1, 2, or 3 attachment stops can be installed as needed.
-
Install spacer sleeve and secure attachment stop with bolt - 3 -.
-
Close other holes using cover - 1 -.