A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-3940002.png)
‹› Installing
-
Make sure the expanding nut - 10 - is clipped inside the door shell - 9 -.
-
Make sure all the clips - 8 - (quantity: 8) are clipped on the inside of the door trim. Replace damaged clips - 8 - => [ Replacing Door Trim Clip ].
-
Make sure all clips - 2 - (quantity: 6) are clipped on the outside of the door trim - 1 -.
-
Install the door trim - 1 - in reverse order of removal.
2 - Clips (Qty. 6)
3 - Window Regulator Switch Strip
4 - Bolt
5 - Screws, (Qty. 2)
6 - Trim Molding
7 - Bolt
8 - Clips (Qty. 8)
9 - Door Shell
10 - Expanding Nut
Disengaging Release Cable for Interior Door Mechanism
-
Pull cable - 2 - from guide - 1 -.
-
Disengage hook - 3 -.
‹› When installing make sure that catch - 3 - faces upward.
Disconnect Connector on Window Regulator Control Module