A4 Sedan V6-3.2L (BKH) (2007)
Front Door Window Regulator: Service and Repair
Window Regulator
Window Regulator
‹› Position of adjusting screws and nuts should be marked before loosening.
Removing
-
Remove door trim.
-
Mark position of screws and nuts.
-
Run window all the way up.
-
Remove window => [ Door Window Assembly Overview ] See: Front Door Window Glass/Service and Repair/Door Window Assembly Overview
.
-
Remove window regulator motor => [ Window Regulator Motor ] See: Front Door Window Motor/Service and Repair.
-
Remove bass speaker.
-
Remove rearview mirror => [ Exterior Rearview Mirror Unit ] See: Mirrors/Service and Repair/Removal and Replacement/Exterior Rearview
Mirror Unit.
-
Remove bolts - 1 -, - 3 - and - 4 -.
-
Unclip cables.
-
Tip rear lower linkage - 5 - forward.
-
Tip front upper linkage - 2 - back.
-
Remove window regulator from door.
Installing
Installation is reverse of removal.
-
After installation, perform basic setting => [ Window Regulator Basic Setting ] See: Testing and Inspection.
Tightening torques => [ Window Regulator Assembly Overview ] See: Front Door Window Regulator Assembly Overview.