A4 Sedan V6-3.2L (BKH) (2007)
5
Ball stud
‹› No replacement part, belongs to delivery casing
-
Gas-filled strut, removing and installing
Cover for rear lid hinge
-
Place electric wiring or wiring for central locking system - 2 - into lower retainer of cable guide at cover - 1 -.
-
Insert trim - 1 - for lid hinge on long hinge lever at bottom and clip in audibly toward top onto hinge lever.
-
Engage clip - 3 - on trim into hinge lever.
Removing and installing rear lid hinges
‹› For easier adjustment of the rear lid hinges, use gradations marked on the hinges.
Removing
-
Loosen nut - 1 -. Tightening torque 21 Nm