A4 Sedan V6-3.2L (BKH) (2007)
1 - Rollover Protection
‹› Press the release - 3 - and disconnect the solenoid valve connector - 2 -.
‹› Remove the roll-over protection - 1 -.
‹› Installing
CAUTION!
Note the safety precautions for the roll-over protection. Refer to => [ Rollover Protection Safety Precautions ] See: Restraint Systems/Air
Bag Systems/Air Bag/Service Precautions/Airbag Safety Precautions. When driving in rollover protection, make sure hands are not
jammed.
-
Install the spacers on the roll-over protection - 1 - on the same locations, if equipped.
-
Move the roll-over protection in - 1 -.
-
Make sure the solenoid valve connector - 2 - engages.
-
Install the roll-over protection - 1 - in reverse order of removal.
-
Check the function of the roll-over protection with the actuator test.
2 - Solenoid Valve Connector
3 - Release
Rollover Protection, Retracting