A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-2273002.png)
-
Slightly lift up the locating lug on the lower part of the connector - 2 - and turn 90 degrees.
-
Pull the lower part of the connector out of the holder.
-
Use a screwdriver to pry off the brake pad retaining spring from the brake caliper housing and remove.
-
Unscrew and remove both guide pins from the brake caliper.
-
Remove the brake caliper housing and lay to one side so that the weight of the brake caliper does not stress or damage the brake hose.
-
Remove the brake pads from the brake caliper housing and/or brake carrier.
Installing
-
Press the piston back into the caliper housing.