A4 Sedan V6-3.2L (BKH) (2007)
/Page-1031013.png)
‹› The crankshaft holder (T40069) must engage in locating hole of crankshaft - 1 -, otherwise repeat adjustment.
-
Remove camshaft locating tools on both cylinder heads.
-
Remove crankshaft holder.
-
Install sealing plug - arrow - of TDC marking with new seal into cylinder block.
Further installation is in reverse order of removal, noting the following:
-
Install stabilizer bar.
-
Install left and right timing chain covers. Refer to => [ Left and Right Timing Chain Covers ] See: Timing Cover/Service and Repair/Left and
Right Timing Chain Covers.
-
Install cylinder head cover. Refer to: Left => [ Left Cylinder Head Cover ] See: Cylinder Head Assembly/Valve Cover/Service and Repair/Left
Cylinder Head Cover, right => [ Right Cylinder Head Cover ] See: Cylinder Head Assembly/Valve Cover/Service and Repair/Right Cylinder Head
Cover.
Tightening Specifications