A4 Sedan V6-3.2L (BKH) (2007)
/Page-1037008.png)
‹› Covers for timing chain must be installed within 5 minutes after applying sealant.
-
Apply sealant bead - arrow -, as shown in illustration, on clean sealing surfaces of left cover for timing chain.
‹› The groove of sealing surface must be completely filled with sealant.
‹› The sealant bead must stand 1.5 to 2.0 mm above the sealing surface.
-
Position left timing chain cover and tighten bolts in sequence - 1 to 8 -.
-
Apply sealant bead - arrow -, as shown in illustration, on clean sealing surfaces of right cover for timing chain.