A4 Sedan V6-3.2L (BKH) (2007)
![background image](/audi/a4_sedan/v6-3.2l_(bkh)/Page-3307001.png)
Air Door Actuator / Motor: Service and Repair
Fresh Air Intake Duct Temperature Sensor G89, Removing and Installing
Fresh Air Intake Duct Temperature Sensor G89, Removing And Installing
Removing
-
Remove glove compartment
-
Reach between air conditioner and bottom panel of plenum chamber, grasp hold of temperature sensor - A - and give it an approx. 90 degrees
turn in direction of arrow.
-
Pull temperature sensor - A - out of air conditioner.
-
Disconnect connector - B -.
NOTE:
-
If Fresh Air Intake Duct Temperature Sensor G89 cannot be removed
-
Remove dust and pollen filter
-
Give temperature sensor - A - approx. 90 degrees turn in direct ion of arrow and remove it from intake housing in direction of passenger
compartment.
Installing
-
Check position of O-ring - C - (moisten slightly with lubricant if applicable).
Then reinstall all components removed in reverse order.