A4 Sedan V6-3.2L (BKH) (2007)
‹› Display field - 1 - indicates "save channel 81 ".
‹› Area - 3 - shows the original PIN number or " 0" and the new PIN number.
-
Accept and save the entry by pressing button - 4 -.
‹› Display field - 1 - indicates "save channel 1, value 1 saved".
‹› By clicking the <- button, you will return to the selection menu.
‹› Entering the PIN number deletes the VIN saved in the Climatronic control module (J255) A/C control head. The Climatronic control module
(J255) A/C control head is now ready to accept the VIN transmitted via the comfort data bus system by the instrument cluster control module
(J285).
-
End on board diagnostic (OBD). Refer to => [ Ending Output ] See: Testing and Inspection/Reading and Clearing Diagnostic Trouble
Codes/Erasing DTC Memory, Ending Output and switch the ignition off.
-
Start the engine.
-
Query the DTC memory of the Climatronic control module (J255) A/C control head. Refer to => [ DTC Memory, Interrogating ] See: Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Memory, Interrogating and erase any displayed faults => [ Erasing DTC
Memory, Ending Output ] See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Erasing DTC Memory, Ending Output.
The fault "incorrect VIN in control module" is no longer displayed or it can now be erased (if the adaptation was performed correctly).
-
Check the VIN stored in the Climatronic control module (J255) A/C control head. Refer to => [ Display Group 081 ] See: Testing and
Inspection/Scan Tool Testing and Procedures/Measured Value Blocks From Display Group 020 (read the measured value block, display group
"081").