A4 Sedan V6-3.2L (BKH) (2007)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor G, Removing and Installing
Fuel Level Sensor G, Removing And Installing
Removing
Observe safety precautions.
Observe rules for cleanliness.
-
Remove fuel delivery unit.
-
Release retaining tabs - arrows - with a screwdriver and pull Fuel Level Sensor G upward and out.
CAUTION: Before remove electrical connectors on Fuel Level Sensor G , first release contact retaining tabs.
-
Disengage electrical connectors - 1 - and - 2 - and disconnect them.
Installing
Installation is in reverse order of removal. Note the following:
-
Connect electrical connections - 1 - and - 2 - and check that they are securely engaged.
-
Insert fuel level sensor G in guides on fuel delivery unit and push down until it engages.
-
Install fuel delivery unit , observing notes for connecting battery.