A4 Sedan V6-3.2L (BKH) (2007)
Headlamp Control Module: Service and Repair
Headlamp Range Control
Headlamp Range Control
CAUTION!
Before beginning repairs on the electrical system:
‹› Obtain the anti-theft radio security code.
‹› Switch the ignition off.
‹› Disconnect the battery Ground (GND) strap.
‹› After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows
according to Repair Information and/or Owner's Manual.
‹› Steps after reconnecting voltage supply => See: Starting and Charging/Battery/Description and Operation/Battery.
CAUTION!
High voltage!
Make sure to disconnect battery Ground (GND) strap before performing work on parts of High intensity gas discharge (xenon)
headlamps marked with yellow high voltage symbols.
=> [ Headlamp Range Control Module ]
Headlamp Range Control Module
Removing
Location: Behind glove box on instrument panel
-
Remove glove box:
-
Unplug connector - arrow -.
-
Remove bolts - 1 - and - 2 - and detach headlamp range control module.
Installing
Installation is the reverse of removal.
Tightening Specifications