A4 Sedan V6-3.2L (BKH) (2007)
Turn Signal Switch: Service and Repair
Turn Signal Switch E2 , Removing And Installing
Removing
-
Remove steering column switch module.
CAUTION:
-
Ensure steering is in straight ahead and centered prior to removing spiral spring.
-
Position of spiral spring must not be changed once removed.
-
Carefully release clip fasteners - arrows - and remove spiral spring - 1 - from steering column switch module.
-
Remove Steering Angle Sensor G85 - 1 - from Steering Column Electronic Systems Control Module J527 in direction of - arrow - .
-
Remove screws - arrows - .
-
Remove the Steering Column Electronics Systems Control Module J527 - 2 - and Windshield Wiper/Washer Switch E22 - 3 - from steering
column switch module.
-
Remove Cruise Control Switch E45 - 1 - from steering column switch module.