A4 Sedan V6-3.2L (BKH) (2007)
Combination Switch: Service and Repair
Windshield Wiper/Washer Switch
Windshield Wiper/Washer Switch
Removing
-
Remove Steering Column Switch Module (SCSM). Refer to => [ Steering Column Switch Module ] See: Steering Column Switch Module.
‹› Steering must be in center position (wheels in straight ahead position) when removing and installing coil connector with slip ring.
-
Carefully release catches - arrows -.
-
Pull return spring with slip ring - 2 - with Steering Angle Sensor (G85) - item 1 - off from steering column switch module (SCSM).
-
Remove bolts - 1 - and - 2 -.
-
Remove Windshield Wiper/Washer Switch (E22) - item 3 - from steering column switch module - arrow -.
Installing
Install in reverse order of removal, observing the following:
-
Make sure all fasteners and electrical connectors are properly engaged.
-
Install Steering Column Switch Module (SCSM).
Tightening Specifications