Audi Workshop Service and Repair Manuals

Fluid Filter - CVT: Removal and Replacement
01J,0AN Continuously Variable Transmission

ATF Filter

Special tools, testers and auxiliary items required

‹› Seal installer (3241)

‹› Puller (T10055)

‹› Thrust piece (T40131)

‹› Puller (T40132)

Removing

Proceed as follows:

-

Remove transmission.

-

Attach transmission to assembly stand => [ Transmission, Securing to Engine and Transmission Holder ] See: Transmission and
Drivetrain/Continuously Variable Transmission/Transaxle/Service and Repair/Procedures/01J,0AN Transmission/Transmission, Securing to
Engine and Transmission Holder. 

-

Remove transmission.

-

Remove Transmission control unit (TCU) (J217) => [ Transmission Control Module ] See: Powertrain Management/Transmission Control
Systems/Relays and Modules - Transmission and Drivetrain/Relays and Modules - CVT/Control Module/Service and Repair/01J,0AN
Continuously Variable Transmission.

-

Remove hydraulic control unit => [ Hydraulic Control Module ] See: Transmission and Drivetrain/Continuously Variable
Transmission/Transaxle/Valve Body/Service and Repair/01J,0AN Continuously Variable Transmission.

-

Remove cover- arrow - from sensor wheel "II ".

-

Remove sensor wheel "II" using 2 screwdrivers -  arrows -.