A4 Sedan V6-3.2L (BKH) (2007)
Fuse Block: Service and Repair
Fuse Panel for Main Fuse
Fuse Panel for Main Fuse
Removing
-
With ignition switched off, disconnect battery Ground (GND) wire. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and
Charging/Battery/Service and Repair/Removal and Replacement/Battery.
-
Remove plenum chamber cover rubber seal in - direction of arrow -.
-
Remove plenum chamber cover - 1 - forward.
-
Fold cover - 2 - to side and remove nut - 3 - at electrical wire.
-
Remove nut - 1 - for fuse panel at positive pole.
Installing
Install in reverse order of removal, observing the following:
-
Connect battery. Required actions => See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery.
Tightening Specifications