A4 Sedan V6-3.2L (BKH) (2007)
Vehicles with Seatbelt Fasten Sensor and Switch in Safety Belt Latch (Driver's Side Only, for Certain Countries):
-
Remove cable from red connector housing.
-
Using a screwdriver, pry out retaining hooks - 4 - on red connector housing - 1 -.
-
Press red connector housing - 1 - back.
-
Cable pin - 6 - (Qty. 2) for belt fasten sensor.
-
Red connector housing - 1 - for belt fasten sensor and main voltage supply.